Rentals   |   Sales   |   Service

• Flows up to 2,600 GPM
• Lockable fuel cap, Battery hold-down, Single point lifting bail, Discharge check valve, and Volute drain
• Skid mounted integral fuel tank sized for 24hr run time; clean out ports at all four corners

• Standard all models: Lockable fuel cap, Battery hold-down, Single point lifting bail, Discharge check valve, and Volute drain
• Standardized parts across all sizes
• Full instrumentation panel with safety shutdowns
• Diesel engine (Tier 3 rebuilt or Tier 4 new) or Electric motor options available

• Increased fuel capacity
• Sound attenuated full or partial enclosures
  
• Engines: Other engines available, consult factory
  
• Trailer mounted: Highway wheels / tires, Torsion bar axle, DOT light kit, Highway fenders, Tow hitch, DOT Certificate of Origin, and Brake kit
  
• Camlock or Bauer type suction and discharge fittings (please consult Holland Pump for additional fittings)

• Construction Dewatering
• Flood Drainage
  
• Site and Pipeline Dewatering
  
• Sock Dewatering

Advantages vs. Competitor Dual Vacuum Wellpoint Pumps

• Our Rotary Lobe pumps are simple and reliable because the system consists of an engine, a gear reducer, and our LobePro pump end
• Our Rotary Lobe pumps self-prime to 25’ with a strong vacuum
• Centrifugal pumps can be adversely affected by entrained air, inadequate Net Positive Suction Head (NPSH) or by not operating within 20% of their best efficiency point (BEP). In contrast, rotary lobe pumps will happily pump air and water, have low suction requirements and operation at any point within their operating range is fine
• Wellpoint applications typically require a pump to maintain a pump down condition whereby the system can be primarily pumping air
• Other competitors utilize oil flood reciprocating vacuum pumps  which are typically  capable of 130 CFM for 8” pumps and 270 CFM for 12” pumps.  By contrast, our LobePro pump ends are capable of 174 CFM for our W8R 8” pump and 348 CFM for our W12R 12” pump
• *MANUFACTURER’S WARRANTY IS A 100% STANDARD WARRANTY COVERING PARTS AND LABOR, INCLUDING WEAR FOR A PERIOD OF 12 MONTHS. DAMAGE CAUSED BY HARD SOLIDS OR BY OVERHEAT IS NOT COVERED.

Benefits vs. Competitor Positive Displacement (PV) Rotary Lobe Pumps

1. Long lasting, leak free seals…avoid the dreaded pressure bottle
   
   • Our  seals are simple to install and pressure tested for leaks before shipment
   • Our seals do not require a pressure bottle containing reserve oil seal oil below 100 psi. Pressure bottles are an unnecessary annoyance requiring daily monitoring.
   • We do not use packing which is, of course, designed to leak
   • We use mechanical seals which are designed for extreme shock and vibration
2. Wear parts shipped within 2 working days of order receipt or the Parts are Free!
   
   • This guarantee applies for 5 years after the purchase of our Rotary Lobe pump
3. Run dry ability – our mechanical seals are oil cooled, permitting limited run-dry operation
4. Steady, Pulseless flow due to helix, 4 wing lobe design
5. Ease of maintenance
   
   • Mechanical seals, lobes, and wear plates can be changed on site without disconnecting suction and discharge fittings.
   • No clutches or complicated timing gears to worry about.
   • Simple improvements such as using corrosion resistant bolts, nuts and materials in the wet end which greatly facilitates disassembly
6. Highly experienced staff
   
   • We have engineers and mechanics in the USA who are here to answer your questions or trouble shoot problems
7. Modern manufacturing facility
   
   • We have the most modern machining, welding, metal cutting/forming, painting and testing facilities available at our 2 Florida manufacturing locations to cater to any custom requirements you may have
8. Made in the USA!
   
   • Our pumps are 100% made in the USA which helps us maintain high quality, fast delivery, and good communication